Product description:
1. The test method of this machine is to put the specimen face upward and put it on the impact site. The hammer is dropped at a certain height and damage and deformation are checked after impact.
2. Standard basis: jis-k5400, ASTM D2794, etc.
Product specification:
* applicable materials: coating test piece or plastic test piece
* drop height: 50~1000mm(optional)
* distance: 50mm
* weight weight: 300g, 500g, 1000g or 2000g(optional)
* radius of impact hammer: 1/2, 1/4, 3/16, 1/8, 1/16 in or 7.9mm(optional)
* impact seat radius: 1/2, 1/4, 3/16, 5/16, 1/8, 1/16 in or 8.1, 15mm(optional)
* surface treatment: surface baking paint is 2~3 times more durable than ordinary spraying (imported from Japan)
* jig treatment: the surface hardcore treatment is resistant to impact and deformation
* volume: 58*45*128cm
* weight: about 60kg
Attach:
1. 3 weights
2. 5 impact hammers
3. 5 impact seats
4. Pull out 1 fork
Note: plastic test plate is made with 2000g weight, r7.9mm impact hammer, 8.1 radius of impact seat, 15mm
